Akai ARP-100

Display Show Hour Set Mode
e. RTC Hour Set Mode
Display Show 12/24H Set Mode (Select 24H)
f. RTC Min Set Mode
Display Show Min Set Mode
Remark : Second will reset for every minute adjustment
B. Setting Alarm 1 and Alarm 2 - Press Alarm set button (2) during
normal mode and keep depress over 2 second to enter alarm set
mode, after enter the setting mode, press Alarm set button (2) to
change the mode cycle as follows :
Action (during data adjustment) :
- Press button (7) to adjust data backward
- Press button (8) to adjust data forward
- Keep depress or button for 2 second to enable auto forward