Akai ARP-100 User Manual

RADIO OPERATION
- Press the on/off button (9) to turn radio on
- Select AM or FM band using the wave band switch (15)
- Select the Station using the tuning control (16)
- Turn the volume control (14) to adjust volume as required
- Press the on/off button (9) to turn radio off.
Note :
- The AM band use an internal directional aerial. Rotate the radio for
best reception.
- Ensure that the FM cord antenna (20) is completely unrolled and
extended for best FM reception.
RESET
- The reset button (17) is located on the back of unit. Use a ballpoint
pen to press it whenever you change the batteries, or unit is not
performing as expected. This will return all settings to default value,
and you will lose any stored data (alarm and clock settings).

Akai ARP-100 Specifications

General

Brand	Akai
Model	ARP-100
Category	Clock Radio
Language	English