TIME SETTING FOR PROJECTION UNIT
- To preset the HOURS, press simultaneously the HOUR Button (25)
and the TIME button (26). Keep them pressed until the hour digits
to be preset are displayed.
- To preset the MINUTES, press simultaneously the MINUTE button
(24) and TIME button (26). Keep them pressed until the minute digits
to be preset are displayed.
- Focus setting: Adjust the projection clock brightness/focus by turning
the brightness/focus adjustment wheel (27) until the projected time is
clearly shown on the ceiling or wall.
NOTE: PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A
DARKENED ROOM.
MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.
THE LED DIGITAL CLOCK AND THE PROJECTION
CLOCK MUST BE SET SEPARATELY
To Next Page
Loading...
