EN - ENGLISH
Input Functions
• Power on/off: Press the Power on/off button on the remote control or soundbar
control panel to turn the unit on and off.
• AUX in: Connect a compatible device using 3.5mm – 3.5mm stereo jack cable
provided, then press the MODE button on the remote control or soundbar control
panel repeatedly until AUX is displayed on the LED display. Ensure the connected
device is producing an audio signal, then adjust the volume of the soundbar using the
Volume up and Volume down buttons on the remote control or soundbar control
panel.
• Bluetooth: Press the BT button on the remote control or repeatedly pressing the
MODE button on the soundbar control panel until BT is shown on the LED display.
The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode.
To Next Page
Loading...
Need help?
General
