EN - ENGLISH
control or soundbar control panel repeatedly until OPT is displayed on the LED
display. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the
volume of the soundbar using the Volume up and Volume down buttons on the
remote control or soundbar control panel.
•FM: Select FM mode by pressing the MODE button on the remote control or
soundbar. The display will show an FM radio frequency. To perform a channel scan,
press Play/Pause button on the remote control or the soundbar. The soundbar will
now scan through the FM frequency, automatically saving any stations with a strong
enough signal. You can now scroll back and forward through the saved channels
using the “previous” or “forward” buttons on the remote control or the soundbar.
•• Equalizer modes: The soundbar has 3 equalizer presets, tailored to complement
various styles of music. Press the EQ button on the remote to choose between Music
(EQ1), Movie(EQ2), News (EQ3).
• Wall mounting: The soundbar has two keyhole slots on the back to enable wall
mounting, using the fixings provided or a compatible soundbar bracket (not
supplied).
1. Firmly fix 1 dowel into each hole in the wall if necessary.
Solid wall (i.e. solid brick, solid concreate, solid wood)
Drywall, plaster wall, lath wall etc.
2. Put the speaker onto the screws in the wall.
To Next Page
Loading...
Need help?
General
