iPod/iPhone functions
● Place the iPod/iPhone in the docking station.
● Switch on the appliance.
● For iPod touch and iPhone select the iPod mode.
● To start playback, press the PLAY/PAUSE button (12) once.
● For extended instructions, read the paragraph "iPod functions" further on
in this manual.
Installing and removing an iPod/iPhone
● To install an iPod/iPhone:
Insert the iPod/iPhone into the docking station.•
● To remove an iPod/iPhone:
Pull the iPod/iPhone gently out of the docking station.•
i
Whilst the iPod/Phone is docked in the system, its battery is
charged automatically. When the battery is fully charged,
the charging process is completed.
Support models
Model Memory
iPod mini 4 GB & 6 GB
iPod (4th generation) 20 GB & 40 GB
iPod colour (4th generation) 20 GB, 30 GB, 40 GB & 60 GB
iPod video (5th generation) 30 GB, 60 GB & 80 GB
iPod nano (1st generation) 1 GB, 2 GB & 4 GB
iPod nano (2nd generation) 2 GB, 4 GB & 8 GB
iPod nano (3rd generation) 4 GB & 8 GB
iPod nano (4th & 5th generation) 8 GB & 16 GB
iPod classic (1st generation) 80 GB & 160 GB
iPod classic (2nd generation) 120 GB
iPod touch (1st & 2nd generation) 8 GB, 16 GB & 32 GB
iPhone 4 GB, 8 GB & 16 GB
3G iPhone 8 GB & 16 GB
3GS iPhone 16 GB & 32 GB
To Next Page