Akai AUS-12H53R150P9 - Operating Modes; AUTO Mode; Cool Mode; Dry Mode

10
Operating Modes
AUTO Mode
In this mode, the air conditioner can automatically adjust the room temperature to
decide the most suitable temperature. At the start of operation, the air conditioner
will automatically select the operation mode according to the room temperature. The
following table shows the conditions which are set at start up.
Room
Temperature (RT)
RT
R
RT
Mode
RT-2
Cool
RT-2
Dry
Heat
Heat pump type
Initial Setting Temperature
Cool Mode
• Press the Manual Swing button or Swing button to change the air ow direction.
• Press the Fan Speed button to change the Fan Speed of indoor unit.
• Press the Temperature Adjustment button to change the set temperature.
Dry Mode
In this mode, the air conditioner automatically sets the room temperature and this
temperature will not appear on display. The Temperature Adjustment button and Fan
Speed button are not functional in this mode.
• Press the Manual Swing button or Swing button to change the air ow direction.
Fan Mode
In this mode, the outdoor unit does not operate. The indoor fan alone operates.
• Press the Manual Swing button or Swing button to change the air ow direction.
• Press the Fan Speed button to change the fan speed of indoor unit.