4. Warning
For the safety of you, your car and others around you, please make sure you
comply with the following basic requirements:
Before using this device, please read all instructions carefully. Failure to follow
the instructions will void the warranty.
2. For traffic safety and to avoid breaking traffic rules, do not look into the
screen or use it while driving.
3. To avoid a short circuit, do not allow the device to come into contact with
water when it is raining.
4. To avoid a short circuit, do not leave metal objects (such as coins or metal
tools) inside the device.
5. The device cannot be repaired by the user, for repairs please contact a
professional team.
6. When the engine is switched off, do not use the car navigation for a long
period of time, otherwise the car will run out of battery.
7. Never insert objects into ventilation slots or other openings of the device.
8. Do not use sharp objects that could scratch or damage the screen.
5. Boot Logo Operation
In the [all applications] interface press the [Start Logo] icon to access the
operating settings interface. Press the button at the bottom of the screen (set
the Boot Logo) to access the Boot Logo settings.
Note: Only the full screen size of BMP files can set the start logo, number of
colours and BMP colour intensity of 32. Previously, BMP files must be placed
on an external storage device.
Restart operation (optional)
To Next Page
Loading...