Akai MPC 5000 - Page 165


==

The MPC5000 will not save the file with the same name. If you loaded the data from the memory card and edited only the
program, select NO.
(!
The MPC5000 will overwrite the data with the new data, which you are about to save. If you have loaded the data from
the memory card and edited the sample data, select YES.
"''"$
This allows you to choose whether to save the program in native MPC5000 format, or legacy MPC1000 format, for compatibility with
the MPC1000, MPC2500, and MPC500.
"8999
The Program will be saved in native MPC5000 format as a .50S file. This file will retain MPC5000 specific formatting, such
as simultaneous pad settings, random and cycle play modes, and filter settings.
"5999
The program will be saved in legacy MPC1000 format as a .PGM file. This file will be able to be opened on an MPC1000,
MPC2500 or MPC500, but will lose any MPC5000 specific formatting, such as such as simultaneous pad settings, random
and cycle play modes, and filter settings.
=I'/=IM(
'=IM(&
B 4-6);&0*
The MPC5000 will start to save the data.
*)/&*
*)/"'"=&
 +""(("'"%+"'(
J%
= /%
See page 149 for more information on selecting destination folders.
@ 0,,#/+D5+II7&87+/\/+I5/
G 4-B6);&0*
The SAVE ALL PROGRAMS window will be displayed.
> 0/%#
I"/(%I/(%
When you save the data you can create a new folder inside in the current folder, and save the data in the new folder. When you use
SAVE ALL PROGRAMS &SAMPLES, a lot of data may be saved.
With the Make new folder option, you can easily create a folder for the data you wish to save.

The MPC5000 will save the data in the selected folder. A new folder is not created.
(!
The MPC5000 will create a new folder and save the data in that folder.
If you select NO, the Replace same files field will be displayed. If the destination folder already has the file with the same
name, select NO to cancel the operation and select YES to replace the file with the new data. When you select YES, the
Folder name field will be displayed. Enter the folder name in this field.
 4-6);&0*
The MPC5000 will start saving the data.
 +""+1#
J%"%
#' 4'&
#           4 # =  7  0
"&##A72/5=<2'#&
= /"%
See page 149 for more information on selecting destination folders.