Akai MPC Studio mk2

161
The Save Current Program or Save Current Sample
function saves the current program or sample (the top
layer of the last pad you pressed) (respectively) to an
external storage device or the internal drive of MPC
X/Live/Live II/One/Key 61/Key 37.
To select the storage device you want to view, tap
it in the Storage column on the left.
Internal is the internal drive of MPC X/Live/Live
II/One/Key 61/Key 37.
MPC Documents is a shortcut to the MPC
Documents folder on the internal drive of MPC
X/Live/Live II/One/Key 61/Key 37.
If you have storage devices connected to USB
ports or SD card slot of MPC X/Live/Live II/One/
Key 61/Key 37, or your computer (with MPC
Studio/Touch), they will appear in this column, as
well.
To enter a folder, double-tap it. Alternatively, turn the
data dial or use the –/+ buttons to move through the
list, and press the data dial, or the center cursor or
Enter (MPC X), to enter a folder. You can also tap one
of the five folder buttons in the upper-right to jump
immediately to those pre-assigned file paths (see
Browser to learn how to do this).
To create a new folder, tap New Folder, use the
virtual keyboard that appears to enter a name, and
then tap Do It. You will immediately enter the new
folder.
To move up one folder level, tap the folder/ icon
in the upper-left corner.
To name the file, tap the File Name field at the
bottom of the screen, and use the virtual keyboard
that appears.
To save the file, tap Save.
To cancel and return to the Menu, tap Cancel.
Alternatively, tap the  icon in the upper-left corner.