Akai SS048A-616

REAR PANEL - CONTROLS AND FUNCTIONS
1. Volume adjust knob & audio input selected
2. Treble adjust knob
3. Bass adjust knob
4. Power on/off switch
5. Adapter DC input
6. Left speaker output
7. CD/DVD audio input
8. PC audio input
9. PC & CD/DVD input selected switch
10. USB jack
11. FM antenna
REMOTE CONTROL
1. Power standby
2. FM mode, short press the button up can search for radio station manually. Long press button up can
look for radio station automatically and this function would stop until the radio station was found out.
3. USB/Bluetooth mode to realize the function of play and pause. Under the FM mode, short press the
button can search and save the radio station automatically. Long press the button can delete the
current radio channel (it can only delete the radio stations which were saved before).
4. USB/Bluetooth mode to realize the last song function. Under the FM mode, short press the button can
choose the last radio channel. Long press the button can save the current station to the previous
channel.
5. FM mode, short press the button down can search for radio station manually. Long press button down
can look for radio station automatically and this function would stop until the radio station was found
out.
6. Under the USB and Bluetooth mode, it can choose 6 kinds of EQ mode circularly.
7. Volume decrease
8. Output suspension
9. Input selection
10. USB/Bluetooth mode to realize the next song function. Under the FM mode, short press the button
can choose the next radio channel. Long press the button can save the current station to the next
channel.
11. Turn off the EQ mode.
12. Volume increase
Note: because the Infrared emitting is at the top of the back of remote control, so it is not correct when
you operate the remote control direction straight to match the speaker. The correct operation is to keep the
remote control and Infrared emitting of the speaker about the Angle of 45 degree - 90 degree.
IMPORTANT NOTES
Make sure the power supply is proper and never handle the power cord or its plug with wet hands when plugging into, or
unplugging from an outlet.
Ensure that the main power switch is in the "OFF" position before connecting the AC power cord to the power supply to avoid
damage to the unit.
A damaged power cord can easily cause an electric shock or fire hazard; Never use a power cord after it has been damaged.