before they are used.
5.3 Start-up Vehicle
5.3.1 Connect the power supply: insert the key of the
door into the switch lock of the p ower supply, turn on
(turn on), the power indicator light is on, and the meter
indicates that the power supply has been connected.
5.3.2 Vehicle start-up.
5.3.3 Driving Vehicles:
Steady rotation should accelerate the vehicle slowly after
starting, and do not immediately increase to the highest
speed to avoid danger. In the course of dr iv ing, we
should maintain uniform speed and balance, and drive
safely. Don't speed up and overload.
When braking, we should develop the habit of braking
and restoring the speed control handle to its orig inal
position, so as to avoid damaging the control system or
increasing the burden of batteries.
When going up the hill, pedals should be used as much
as possible to assist cycling. In order to avoid exce ssive
consumption of electricity, while conducive to motor,
battery maintenance.
After use, the lock of the door must be closed, the key of
the door must be removed and charg ed in ti me
according to the situation.
5.4. Promotion and parking
5.4.1 When you get out of the car to promote or stop, you
must turn off the power supply, in order to avoid
accidental rotation of speed control handles.
5.4.2 Vehicles should be avoided frequently starting with
speed control handles at rest to ensure the service life of
To Next Page
Loading...