Akrapovic Sound Kit - Page 10

For the Sound Kit Remote Controller to work, it must be paired with the
Sound Kit Receiver. The (original) Akrapovič exhaust system with the valves
and Sound Kit Receiver must first be installed. Refer to the Akrapovič
exhaust system and the Akrapovič Sound Kit Installation Manual.
To pair the Sound Kit Remote Controller with the Sound Kit Receiver, press
and hold the button on the Sound Kit Remote Controller until the red LED
starts flashing. Switch the car ON to supply the Sound Kit Receiver.
The pairing process will occur automatically within ten seconds. If the
pairing process is completed successfully, the LED (white or red) on the
Sound Kit Remote Controller will turn ON for fifteen seconds.
PAIRING PROCESS
with a New Sound Kit Remote Controller
OPERATING THE AKRAPOVIČ SOUND KIT
WITH THE SOUND KIT REMOTE CONTROLLER
10 / 36