15 / 36
No color: sleep mode
Orange: battery level too low to operate
or detected default on the battery
If the button is not pressed for a full fifteen seconds, the Sound Kit
Remote Controller enters sleep mode until the next time it is pressed.
Note that the valves are by default always in Sound mode 1 position
when the engine is started. If the Sound Kit Remote Controller stops
operating during driving (e.g., the battery runs out, or the Sound Kit
Remote Controller is damaged or is not functioning due to some other
technical reason), switching between the modes will be automatically
managed by switching between different car modes. In this mode,
valve operation depends on the selected car mode (Efficient, Sport
and Sport Plus).
At the next engine start, the default mode is applied.
The Sound Kit Remote Controller will not function when the Akrapovič
Car Sound Kit App is connected.
To Next Page
Loading...