24 / 36
the screen (Figure 11) to switch between the two different
positions of the valves.
Note that the valves are by default
always in Sound mode 1 position
when the engine is started. If the
Bluetooth connection is lost/
disconnected or the Akrapovič Car
Sound Kit App is closed, the valves
remain in the last mode activated
until the vehicle’s engine is
switched OFF. At the next engine
start, the default mode is applied.
By touching the back button, the
app disconnects from the Sound
Kit Receiver. The Sound Kit Remote
Controller can now be used.
Figure 11
To Next Page
Loading...