2
3
5
6
7
1
10
9
8
16
12
13
14
11
15
NO. ITEM PART NO
1 Body (2-1/2” NH) 115498
2 Swivel (2-1/2” NH) 101420
3 Swivel Plug 742023
4 Gasket 717043
5 Ball Bearings (39) *
6 Retaining Nut 115497
7 Flow Sensor 93000046
8 Pressure Transducer Guard 115499
9 Pressure Transducer 93000030
10 Screw (4) 765029
11 Control Unit (PSI/GPM) 93010001
11 Control Unit (LPM/kPa) 93010002
11 Control Unit (LPM/bar) 93010003
12 12VDC Vehicle Power Adapter 707390
13 110 VAC Charger 707386
13 240 VAC Charger 707497
14 110 VAC Cable 707387
15 Case & Inserts 707420
16 Pressure & Flow Cable 707385
-- Replacement Battery 93010026
* Packet of 50 Ball Bearings - P/N 109041
ISO 9001 REGISTERED COMPANY
PHONE: 330.264.5678 or 800.228.1161 I FAX: 330.264.2944 or 800.531.7335 I akronbrass.com
WARRANTY AND DISCLAIMER: We warrant Akron Brass products for a period of five (5) years after purchase against defects in materials or workmanship. Akron Brass will repair or replace
product which fails to satisfy this warranty. Repair or replacement shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service.
We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or modification after delivery; damage; failure to
follow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY
STATEMENT, AND WE DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential,
incidental or indirect damages (including, but not limited to, any loss of profits) from any cause whatsoever. No person has authority to change this warranty.
© Akron Brass Company. 2017 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company.
revised: 08/17