Aktobis WDH-TG60L - User Manual

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: info@aktobis.de
Drum Blower WDH-TG60L
Dear Customer,
You have chosen a high-quality product. To ensure that you get a lot of enjoyment from
this product, here are a few more tips:
In case of any problems:
We hope that the unit meets your expectations! If, despite the greatest possible care, there
should ever be cause for complaint, please contact us briefly, as we are very concerned
about your satisfaction and would like to clear up any misunderstanding.

Summary

Product Description

Important Safety Instructions

Instructions for Use

Operational Environment

Specifies the maximum operating temperature and altitude limits for the unit.

Commissioning

Steps for setting up and starting the drum blower, including positioning and power connection.

Blower Positioning and Airflow Adjustment

Instructions on how to position the blower for desired airflow and adjust its direction.

Fan Speed Control

Explanation of the rotary switch for selecting fan speed stages (OFF, weak, medium, strong).

Maintenance, Cleaning & Storage

Axle Maintenance

Recommendation for professional lubrication of the blower axle every 1,500 operating hours.

Cleaning Instructions

Guidelines for cleaning the unit's exterior using soft cloths and mild cleaning agents.

Storage Recommendations

Advice on covering or packing the unit and storing it in a dry, ventilated place.

Other Operating Instructions

Safe Power Disconnection

Instruction not to disconnect the mains plug by pulling the power cable to prevent damage.

Usage Prohibitions Near Blower

Warning against using insect spray, oil spray, or paint spray near the blower due to fire risk.

Placement Precautions

Instruction not to place the appliance on sloping or uneven ground for stability.

Technical Specifications

Warranty Statement

Product Conformity

EMC Conformity Standards

List of standards (EN 55014, EN 61000) for Electromagnetic Compatibility testing.

CE (LVD) Conformity Standards

List of standards (EN 60335, EN 62233) for Low Voltage Directive conformity testing.

Correct Product Disposal

Aktobis WDH-TG60L Specifications