Akura SaorView AVT8010

Other manuals for Akura SaorView AVT8010

Quick Start Guide1 page

Questions and Answers

T
Tracy BarnesAug 16, 2025
Why is my Akura SaorView AVT8010 TV Receiver picture freezing and breaking up?
- S
  Sarah BrownAug 16, 2025
  The TV picture may freeze or break up due to a poor aerial signal. To resolve this, have your aerial signal checked. If you are using an indoor aerial, you might need to switch to an outdoor aerial.
R
Ryan PhillipsAug 19, 2025
What to do if my Akura TV Receiver remote control is not working?
- C
  christinewrightAug 19, 2025
  If the remote control for your Akura TV Receiver isn't functioning, the batteries may be exhausted, replace them. Also, ensure there isn't an object blocking the I/R signal; remove any obstructions.
S
Susan JohnsonAug 22, 2025
How to fix Akura TV Receiver when there is no picture and the LED is green?
- D
  Donna BennettAug 22, 2025
  If there is no picture and the LED is green on your Akura TV Receiver, ensure the Scart lead or HDMI lead is connected to the TV and that the TV has the correct input selected.
C
Christopher DixonAug 25, 2025
What to do if Akura SaorView AVT8010 has no audio in HDMI mode?
- J
  Jasmine PatelAug 26, 2025
  If you're experiencing no audio in HDMI mode with your Akura TV Receiver, the system may have crashed. Unplug both the TV and the TV Receiver, then re-power both devices.
T
Terry AndradeAug 28, 2025
What to do if my Akura SaorView AVT8010 is dead and no LED is lit?
- T
  Taylor SmithAug 28, 2025
  If your Akura TV Receiver is dead and no LED is lit, check that the power lead and mains adapter are connected and turned on.
S
Susan WallaceAug 31, 2025
What to do if my Akura SaorView AVT8010 TV Receiver is not receiving or showing a certain channel?
- C
  Crystal CochranAug 31, 2025
  If your Akura TV Receiver is not receiving or showing a certain channel, the parental lock may be activated. Enter the Setup menu and check/reset the locks.
J
John CowanSep 3, 2025
What to do if my Akura TV Receiver has no picture and the LED is lit red?
- J
  johnsonjackSep 3, 2025
  If there is no picture and the LED is lit red on your Akura TV Receiver, the device is likely in standby mode. Press the Power button on the TV Receiver or the Power button on the remote control.
K
Kaitlin PeckSep 6, 2025
Why is my Akura SaorView AVT8010 TV Receiver not 'seeing' Media Memory?
- W
  william80Sep 6, 2025
  If your Akura TV Receiver is not 'seeing' Media Memory, you MUST unplug the DC input before connecting the Media Memory. When starting up, the TV Receiver should see the Media memory and display a message.
J
Joshua WattsSep 9, 2025
Why is my Akura SaorView AVT8010 TV Receiver not playing certain types of media?
- R
  Rodney OdonnellSep 9, 2025
  If your Akura TV Receiver is not playing certain types of media, it may be due to incompatible media formats. Only JPEG and MP3 files are guaranteed to play.
U
ugreeneSep 12, 2025
Why is Akura SaorView AVT8010 not recording a TV programme in Timer mode?
- C
  Christopher JimenezSep 12, 2025
  If your Akura TV Receiver is not recording a TV programme in Timer mode, the timers may be incorrectly set. Only ONE timer may be set in one time segment.