RelayRelay: The relay to be unlocked using the door-opening methods should be assigned to
the user.
Web RelayWeb Relay: Specify the ID of web relay action commands that you’ve configured on the
Web Relay interface. A default value of 0 indicates that the web relay will not be triggered.
Floor No.Floor No.: Specify the accessible floor(s) to the user via the elevator.
ScheduleSchedule: Grant the user access to open designated doors during preset periods by
relocating the desired schedule(s) from the left box to the right one. Besides custom
schedules, there are 2 default options:
Always: Allows door opening without limitations on door open counts during the
valid period.
Never: Prohibits door opening.
To Next Page
Loading...
