Need help?Do you have a question about the AKYAPAK AHS AK400 and is the answer not in the manual?
Explains minimum/maximum roll values, supporter, and pull back values.
Setting minimum values for left and right rolls for bending.
Procedure to set locator values for the right roll and material positioning.
Method to measure and set the pull back distance for material.
Steps to record a new bending process using AUTO and NEW PLAYBACK buttons.
Instructions for loading and editing previously saved NC files.
Procedure to change axis names and positions using the interface.
Using Save and Save As to store corrections and avoiding empty lines.
Explains AK400 program for bending calculations using outer radius.
Defines parameters: Rotation (L), Radius (R), Radius Angle (A), Length (S).
Explains that a CNC file consists of entering values, creating lines, and simulation.
Fields for entering program name, material thickness, and width.
Entering numbers and bending commands, activating specific commands.
Using OK to confirm commands and options for deleting/adding lines.
How the screen indicates mistakes in command lines.
Button to calculate material length and check program steps for errors.
Details on pre-bending and bending phases, defining radius parameters.
Step-by-step guide to programming a 500mm radius circle.
General| Brand | AKYAPAK |
|---|---|
| Model | AHS AK400 |
| Category | Control Systems |
| Language | English |
To Next Page