6 | ADC-CSVR126 Stream Video Recorder Quick Start Guide | 7
Viewing Live and Recorded Video Locally
1 Ensure that you have followed the setup instructions in this guide.
2 Connect a computer mouse (wireless or wired) using one of the
USB ports on the SVR.
3 When prompted, enter the password you created for the device
during the Alarm.com setup process.
MAIN MENU OPTIONS
Live View
Select different live view camera layout options and rotate camera feeds.
Playback
Watch recorded video and control play back speeds.
Settings
Initiate a factory reset of the device.
Powering Down the Device
• Preferred method for devices connected to a display:
Log in and navigate to the Power icon in the upper right hand
corner of the screen. Follow the on-screen prompts. After the
screen goes dark, toggle the Power switch on the back of the
device to the Off position.
• Alternative method: If the device is not attached to a display
(or you cannot select the on-screen Power
icon), toggle the
Power switch on the back of the device to the Off position.
You may now unplug the device from AC power.
To Next Page
Loading...
Need help?
General