EasyManua.ls Logo

Alarm.Com ADC-V522IR User Manual

Alarm.Com ADC-V522IR
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Indoor Fixed w/IR (ADC-V522IR) - Installation Guide
Pre-installation checklist
ADC-V522IR camera (included)
AC Power adapter (included)
Ethernet or Wireless (2.4 or 5 GHz) connection to broadband (Cable, DSL, or Fiber Optic) Internet
A computer, tablet or smartphone with Wi-Fi is required if the router does not have the Wi-Fi Protected Setup
(WPS) feature
Login and password for the Alarm.com account to add the camera to
Note: There are three local options for connecting the ADC-V522IR to the network: Ethernet Mode, Wi-Fi Protected
Setup (WPS) Mode, and Access Point (AP) Mode.
For information about how to install a video device via MobileTech, see Install a video device using the MobileTech app.
For information about how to reconnect a camera to a network and troubleshooting, see Reconnect a camera to a Wi-Fi
network if the router, network equipment, or wireless settings change.
Ethernet mode
1. Using an Ethernet cable, connect the camera to the network.
2. Connect the camera’s AC power adapter and plug it into a non-switched outlet.
3. Add the device to the account by either selecting the account in MobileTech, or by using a web browser and
entering the following URL: www.alarm.com/addcamera
4. Select the camera from the video device list or type in its MAC address to begin adding the camera. The camera’s
MAC address is located on the back of the camera.
5. Follow the on-screen instructions to finish adding the camera.
6. If the camera is going to be wireless, set up the wireless network once the camera is added to the account. To
program the new wireless information:
a. Click Setup wireless now.
If performing from the home page of the Customer Website:
i. Click Video.
ii. Click Settings.
iii. If there are multiple cameras on the account, select the camera to update using the Video
Device dropdown menu.
iv. Click Wireless Network, then continue with the following steps.
b. Verify the camera to update is selected in the dropdown for Video Device, then click Scan.
https://answers.alarm.com/Installation_and_Troubleshooting/Video_Devices/Indoor_Fixed_w%2F%2FIR_ADC-V522IR/Indoor_Fixed_w%2F%2FIR_(ADC-V522IR)_-_Installation_Guide
Updated: Fri, 21 Sep 2018 18:29:15 GMT
1
Question and Answer IconNeed help?

Do you have a question about the Alarm.Com ADC-V522IR and is the answer not in the manual?

Alarm.Com ADC-V522IR Specifications

General IconGeneral
Resolution1080p
Field of View90°
Night VisionYes
IR RangeUp to 30 feet
Ingress ProtectionIP65
AudioTwo-way audio
CompatibilityAlarm.com platform
Power SourcePower over Ethernet (PoE) or 12V DC
Storagecloud storage
Operating Temperature-4°F to 122°F (-20°C to 50°C)

Related product manuals