To Next PageTo Next Page
Need help?Do you have a question about the albatros Niwa Design and is the answer not in the manual?
Key information about the Mini-pool cover and its weight-bearing limitations.
Details on positioning and adjusting jets for customizable hydromassage effects.
Explanation of the Airpool system for gentle body massage and relaxation.
Description of the combined Whirlpool and Airpool system for an enhanced massage experience.
How to operate the two-speed pump for varying hydromassage intensities.
Instructions for using the single-speed pump for hydromassage functions.
Controls Airpool massage function and ozone emission for relaxation.
Operation of the underwater LED lamp for ambient lighting.
Used for adjusting settings like temperature, filtering, and ECO function.
Manages energy-saving mode to maintain water temperature efficiently.
Interpretation of display signals and their meanings during operation.
How to set and maintain the desired water temperature in the Mini-pool.
Locks specific keys, allowing limited operation of the Mini-pool.
Locks all keys, rendering the control panel inoperative.
Allows rotation of display messages by 180 degrees for improved visibility.
Activates a rapid filtration cycle for intensive use or uniform chemical dissolution.
Temporarily deactivates programs for maintenance without disconnecting power.
Option to increase the maximum water temperature limit.
Explanation of the water heating system and its operational phases.
Role and operation of the water circulation pump during various cycles.
Function of the ozonizer for water sanitization and its operation.
System to prevent water freezing in the Mini-pool during cold weather.
Monitors water flow through the heater, indicating potential issues.
Monitors heater temperature to prevent overheating and trigger safety shutdowns.
Alerts users when the water level is insufficient for safe operation, disabling functions.
Overview of the steps for general operation and initial setup of the Mini-pool.
Specific instructions for the initial setup and first use of the Mini-pool.
How the system responds to and indicates excessively high water temperatures.
Essential guidance on maintaining water quality through chemical treatment and filtration.
Suitable and unsuitable types of disinfectants for Mini-pools, with specific warnings.
Explains key terms and components related to water treatment and testing.
Clarifies common units used for chemical additives in water treatment, like ppm and mg/l.
Importance of pH levels for water quality, disinfectant effectiveness, and user comfort.
Role of total alkalinity in water stability and how to manage it using additives.
Understanding water hardness, its impact on the Mini-pool, and methods to manage it.
Daily procedure for checking and adjusting water pH levels using a test kit.
Methods and importance of keeping the water disinfected and free from harmful microorganisms.
How to measure and maintain optimal residual bromide levels for effective disinfection.
Product to prevent scale formation, especially in hard water areas.
Prevents the formation of algae in the Mini-pool water through rapid-acting formulation.
Eliminates foam formation caused by agitation and surface grease.
Removes grease and dirt from the Mini-pool walls after draining.
Steps to prepare the Mini-pool for winter storage, especially in cold climates.
Guidance for managing the Mini-pool during winter in warmer regions with anti-freeze protection.
Care instructions for wooden parts, cushions, and the protective cover for longevity.
Procedures for cleaning and replacing the skimmer's cartridge filters for water clarity.
How to clean the suction nozzle to ensure efficient operation and safety.
Steps to clean Airpool valves if they stop injecting air, removing sediment.
Procedure for cleaning the filter associated with the blower unit for optimal performance.
General
