VC-11 Path trace identifier mismatch
...................................................................................................................................................................................................................................
Alarm identifier
VC11cTIM
Information Mismatch between the accepted (received) path trace identifier and the
expected path trace identifier.
Alarm category Transmission
ASAP sdhLOPath
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications –
Cause A provisioned trace identifier inserted in a VC-11 path was received corrupted
or not at all, due to a wrong provisioning of cross-connections, or due to
hardware or transmission failures.
Actions Check cross-connections.
Check upstream external cabling and equipment.
Check trace identifier provisioning in VC-11 source and sink functions.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-221
To Next Page
Loading...
