Alcatel-Lucent 1643 AMS - VC-4 Network connection server signal fail

VC-4 Network connection server signal fail
...................................................................................................................................................................................................................................
Alarm identifier VC4cSSF
Information This alarm signals that the VC-4 Connection is unavailable due to faults in the
serving section layer, as indicated by the reception of the alarm indication
signal at the high order path layer. This can occur when the section layer and
higher order path layer are managed separately.
Alarm category Transmission
ASAP sdhHOPath
Alarm severity
(default setting)
Information
Reporting state
(default setting)
Reported
Local indications –
Cause One or more STM-1 or MS faults in this or upstream nodes.
Actions This alarm message is always raised as a consequence of one or more
equipment and/or transmission faults. Refer to the description of the
corresponding alarm messages.
Alarm messages
...................................................................................................................................................................................................................................
1-294
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007