VLAN configuration mismatch
...................................................................................................................................................................................................................................
Alarm identifier
MACcVCM
Information VLAN configuration mismatch
Alarm category Transmission
ASAP ethPath
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications –
Cause Different customers on one unit have the same customer ID or the same VLAN
ID is being used on different virtual switches in one unit.
Actions Re-plan the network to avoid this configuration mismatch.
It is not permitted to provision a VLAN which is currently in use in another
virtual switch on the same data unit.
Note(s) The required service cannot operate successfully.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-299
To Next Page
Loading...
