Wrong 2 Mbit/s extension board present
...................................................................................................................................................................................................................................
Alarm identifier E12XcWUP
Information A wrong extension board is present or the present extension board cannot be
identified.
Alarm category Equipment
ASAP equipment
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications The FAULT LED on the unit is lit.
Cause Wrong extension board inserted, or the inserted extension board is defective.
Actions Replace the extension board , and insert an extension board of the provisioned
type.
Alarm messages
...................................................................................................................................................................................................................................
1-312
Alcatel-Lucent - Proprietary
See notice on first page
365-312-803R7.2
Issue 4, May 2007
To Next Page
Loading...
