EasyManua.ls Logo

Alcatel-Lucent 1643 AMS - 1.5 Mb extension board failure

Alcatel-Lucent 1643 AMS
386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.5 Mb extension board failure
...................................................................................................................................................................................................................................
Alarm identifier
E11XcUPF
Information The 1.5 Mbit/s extension board (X16DS1) is defective.
Alarm category Equipment
ASAP equipment
Alarm severity
(default setting)
Prompt
Reporting state
(default setting)
Reported
Local indications The red fault LED on the unit is lit.
Cause The on board self-test circuitry indicates that an essential function of the unit
has failed.
Actions Replace the 1.5 Mbit/s extension board.
Note(s) As there is no equipment protection of the 1.5 Mbit/s extension board,
E11XcEQF, and E11XcUPF are always reported simultaneously as a reminder
that a hardware failure is service affecting.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-17

Table of Contents

Other manuals for Alcatel-Lucent 1643 AMS