EasyManua.ls Logo

Alcatel-Lucent 1643 AMS - DCN-Tunnel auto provisioning configuration error

Alcatel-Lucent 1643 AMS
386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DCN-Tunnel auto provisioning configuration error
...................................................................................................................................................................................................................................
Alarm identifier
DCNTAPcCONF
Information DCN-Tunnel auto provisioning configuration error.
Alarm category Processing error
ASAP dcn
Alarm severity
(default setting)
Deferred
Reporting state
(default setting)
Reported
Local indications
Cause DCN-Tunnel is not set for this network element.
Actions Provision the correct DCN tunnel parameters.
Check intermediate tributary cabling.
Note(s) IP Tunneling is a DCN feature which supports the transport of IP traffic from
the Ethernet interface of one NE to the Ethernet interface of another NE using
the DCN as the transport medium. As the DCN is using OSI the IP PDUs will
be embedded in OSI PDUs.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-51

Table of Contents

Other manuals for Alcatel-Lucent 1643 AMS