Alcatel-Lucent 1643 AMS - Loss of voltage power feed B

Loss of voltage power feed B
...................................................................................................................................................................................................................................
Alarm identifier
POWBcFLR
Information No supply voltage at power feed B.
Alarm category Environment
ASAP
Alarm severity
(default setting)
Deferred
Reporting state
(default setting)
Reported
Local indications –
Cause The power supply cable for power feed B is not or not properly connected at
the Power Distribution Panel (PDP), or the corresponding circuit breaker is
opened, or the corresponding fuse is blown.
Actions Check the power supply cabling, circuit breakers and fuses.
Alarm messages
...................................................................................................................................................................................................................................
365-312-803R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
1-79