Alcatel-Lucent 1643 AMS - Equipment reports

Equipment reports
...................................................................................................................................................................................................................................
Equipment inventory
1643 Access Multiplexer AM / 1643 Access Multiplexer Small AMS automatically
maintain an inventory of the following information of each installed circuit pack:
• Serial number
• ECI code
• Functional name
• Item code
• Software release (of the NE)
• Comcode
• Interchangeability Marker
You can obtain this information by an inventory request command.
1643 AMS additionally supports an inventory of the used SFPs. Besides the
administrative state the following information can be retrieved for the currently present
and last accepted SFP:
• Physical identifier
• Connector type
• Transceiver code
• Revision number
• Vendor serial number
• Comcode
• Compatibility byte
• Alcatel-Lucent unique ID
• WES SFP vendor ID
• SFP length
• Module qualifier
• Module type
For detailed information on these parameters please refer to the User Operations
Guide, Chapter Equipment provisioning - Parameters for viewing SFP inventory data.
Equipment failure reports
Failure reports are generated for equipment faults and can be forwarded via the
ITM-CIT or Lucent OMS interfaces.
Features
...................................................................................................................................................................................................................................
365-312-801R7.2
Issue 3, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
2-19