Important! The power of the 1643 AM / 1643 AMS must be switched off before
the option card is inserted.
X16E1-V3 option card
The X16E1-V3 option card provides 16 additional 2 Mbit/s (E1) interfaces.
The X16E1-V3 option card is plugged into the P1 connector as described in “Front
view without cover” (p. 4-3). Physical interfaces to the additional E1 ports are 16 RJ45
connectors for the use of shielded twisted pair cables.
The following figure shows the block diagram of the X16E1-V3 option card.
Inventory
EEPROM
P2
Connector
Power
Module
Main
Board
TSI
to
Telecom
Bus
Interface
Control
Ckts
DS3
Interface
Circuit
DS3 Connector
(Coax)
DS3 Port
<1>
DS3
Interface
Circuit
DS3 Connector
(Coax)
<2>
J1
Generic
Option
Board
Connector
Product description
Option cards
...................................................................................................................................................................................................................................
365-312-801R7.2
Issue 3, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
4-17
To Next Page
Loading...
