Specifications
The following optical SFPs are available:
• STM-1, S1.1 (CC109469809), short haul, 1300 nm, 15 km
• STM-1, L1.1 (CC109469825), long haul, 1300 nm, 40 km
• STM-1, L1.2 (CC109469817), long haul, 1500 nm, 80 km
• STM-1, 155E (CC109543561), electrical
• STM-1/STM-4, SWF 1-1, (CC109559500), 1480/1500 nm, single fiber bidirectional
• STM-1/STM-4, SWF 1-2, (CC109559492), 1490/1310 nm, single fiber
bidirectional.
• GE SX (CC109526483), 850 nm, multi-mode 550 m
• GE LX (CC109526491), 1310 nm, single-mode 5–10 km
• GE ZX (CC109534347), 1550 nm, single-mode 80 km.
The characteristics of the SFPs are summarized in the table below.
Table 4-19 Optical SFP specifications
S1.1 L1.1 L1.2
Transmitter
Wavelength 1270...1360 nm 1270...1360 nm 1530...1565 nm
Max. output power –8...–15 dBm +0...–5 dBm +0...–5 dBm
Eye mask pattern see G.957 see G.957 see G.957
FDA class/IEC hazard
level
Class I/1 Class I/1 Class I/1
Maximum dispersion 185 ps/nm 246 ps/nm not applicable
Attenuation range 0...12 dB 10...28 dB 10...28 dB
Optical path penalty < 1 dB < 1 dB < 1 dB
Receiver
Sensitivity –28 dBm min. –34 dBm min. –34 dBm min.
Overload –8 dBm max. –10 dBm max. –10 dBm max.
Figure 4-52 Dust plug
System cabling
Optical interfaces (AMS unit/X5IP card)
....................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
4-53
To Next Page
Loading...
