Figure
MSA latch (type 2)
Proceed as follows to remove this type of SFP:
...................................................................................................................................................................................................
1
Put the fibers away from the transceiver.
...................................................................................................................................................................................................
2
Press on top of the locking device and pull the SFP out with your fingers (see figure
below).
Figure B-1 Unlocking a MSA latch (type 1) SFP
Installation trouble shooting
Removing the SFP modules
...................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
B-13
E ND OF STEPS
...................................................................................................................................................................................................