Mounting 4x2.5mm coax (75 Ω) to RJ45 connector
...................................................................................................................................................................................................................................
Assembly instructions
Please observe the following assembly instructions:
...................................................................................................................................................................................................
1
Mount the teflon tube under the coax braid.
...................................................................................................................................................................................................
2
Solder wires to the braid and core wire.
...................................................................................................................................................................................................
3
Move the shrink tube over the soldered core wire.
Cable assembly instructions
...................................................................................................................................................................................................................................
C-8
Alcatel-Lucent - Proprietary
See notice on first page
365-312-802R7.2
Issue 4, June 2007
To Next Page
Loading...
