Alcatel-Lucent 1643 AMS - Page 276

NE provisioning and stand
alone installation test, 2-1
Physical and power
installation, 1-1
Environmental requirements,
2-10
ESD
See: Electrostatic discharge
ESP
See: Electrostatic protection
Exit checklist
Link acceptance test, 8-8
NE provisioning and stand
alone installation test, 7-28
Physical and power
installation, 5-8
.............................................................
F
Fan unit, 3-10, 3-16, 3-24, 3-36
Fan unit test, 5-4
Fast download application, 6-6
Fiber cleaning, B-10
Final checklist, 9-4
.............................................................
G
Grounding, 4-11
.............................................................
I
Installation of an option card,
3-7, 3-21
Installation steps, 2-16
Interfaces
AC connector, 4-4, 4-6
DC connector (AM), 4-4
DC connector (AMS), 4-6
DS1 connector (Main board
/ X16DS1 card), 4-35
DS3 connector (X2DS3
card), 4-41
E1 connector (Main board /
X16E1-V3 card), 4-33
E3 connector (X2E3 card),
4-40
EOW connector, 4-30
Fan alarm connector, 4-15
Fan power connector, 4-13
ITM-CIT connector, 4-27
LAN connector (X4IP,
X8PL, and X5IP card),
4-42
MDI/MDO connector, 4-19
Optical connectors (Main
board), 4-55
Optical connectors
(X2S11TRIB card), 4-57
Q-LAN connector, 4-25
SHDSL connector
(X12SHDSL-V2 card),
4-37
STM-1e connector
(X2STM1ETRIB card),
4-47
Timing connector, 4-23
X.21 connector (X4X.21
card), 4-45
ITM-CIT
Cable connection, 6-10
Installation procedure, 6-3
Requirements, 2-14, 6-3
.............................................................
L
Laser classification, 1-10
Laser safety guidelines, 1-10
.............................................................
M
MIB provisioning, 6-22
.............................................................
N
NE date and time, 6-15
NE login procedure, 6-12
NE provisioning
MIB, 6-22
NE date and time, 6-15
Node creation, 6-17
Slot provisioning, 6-20
NE software download, 6-7,
B-4
Network cabling, 8-2
Node creation, 6-17
.............................................................
O
Optical circuit pack
specifications, 1-13, 4-50,
4-53
Optical connectors
Specifications (AM), 4-50
Specifications (AMS), 4-53
Types, 4-50, 4-52
Option cards
Available option cards, 2-7
Cabling, 4-32
Handling instructions, 2-12
Installation (AM unit), 3-7
Installation (AMS unit),
3-21
.............................................................
P
Physical installation check, 5-5
Pin assignment
DC connector (AM), 4-4
DC connector (AMS), 4-6
DS1 connector (Main board
/ X16DS1 card), 4-35
E1 connector (Main board /
X16E1-V3 card), 4-33
EOW connector, 4-30
Fan alarm connector, 4-15
Fan power connector, 4-13
ITM-CIT connector, 4-27
LAN cable - GE, 4-42
LAN connector (X4IP,
X8PL, and X5IP card),
4-42
MDI/MDO connector, 4-19
Q-LAN connector, 4-25
Index
...................................................................................................................................................................................................................................
IN-2
Alcatel-Lucent - Proprietary
See notice on first page
365-312-802R7.2
Issue 4, June 2007