Alcatel-Lucent 1643 AMS - Main menu and buttons; User roles

Main task Chapter number Subtask [section/page]
External cable
installation
4 “Ground wiring” (p. 4-11)
“Fan alarm and LED interface” (p. 4-15)
“MDI/MDO interface” (p. 4-17)
“Timing interface” (p. 4-23)
“Q-LAN interface (OMS)” (p. 4-25)
“ITM-CIT interface” (p. 4-27)
“EOW interfaces” (p. 4-30) (AMS only)
Option card cable
installation
“E1 interfaces (Main board/X16E1-V3 card)” (p. 4-33)
“DS1 interfaces (Main board/X16DS1 card)” (p. 4-35)
“SHDSL interfaces (X12SHDSL-V2 card)” (p. 4-37)
“E3 interfaces (X2E3 card)” (p. 4-40)
“DS3 interfaces (X2DS3 card)” (p. 4-41)
“LAN interfaces (X4IP, X8PL and X5IP card)” (p. 4-42)
“X.21 interfaces (X4X.21 card)” (p. 4-45)
“STM-1e interfaces (X2STM1ETRIB card)” (p. 4-47) (AM
only)
Fiber cabling “Aggregate interfaces (Main board)” (p. 4-55)
“Tributary interfaces (X2S11TRIB card)” (p. 4-57) (AM
only)
Power
initialisation
5 “Switching on and testing supply voltage” (p. 5-3)
“Fan unit test” (p. 5-4)
Physical
installation check
“AM/AMS unit installation” (p. 5-6)
“Cable connections” (p. 5-7)
Software
installation
6 “Installing ITM-CIT” (p. 6-3)
“Installing the fast download application” (p. 6-6)
“Fast NE software download” (p. 6-7)
“Connecting the ITM-CIT to the NE” (p. 6-10)
NE provisioning “NE date and time” (p. 6-15)
“Node creation” (p. 6-17)
“Slot provisioning” (p. 6-20)
“Confirm/Update the MIB” (p. 6-22)
General information Sequence of steps
...................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Alcatel-Lucent - Proprietary
See notice on first page
2-17