Parameters for viewing the software stored in the NE
...................................................................................................................................................................................................................................
Introduction
It is possible to view the following information about the network element controller
software:
• the software version now stored in the active and backup store.
• the store state shows whether the software in the store is valid.
Active store
The software version of the executing code of the software loaded in the network
elements active store is described by four codes. In the Software Inventory window
only the Item Code is displayed.
Code Description
Item Code A code used to uniquely identify any system
component.
Interchangeability Marker An identification mark to indicate interchangeability
among components.
Serial Number A number that indicates the sequence number and
the year, date, and location of manufacture.
Com Code A code which identifies the component.
Backup store
The same codes as those listed for the Active Store are used to describe the software
stored in the backup store.
Active store state
The active store contains valid software if the store state is: Store Active.
Backup store state
The backup store contains valid software if the store state is: Store Inactive.
Software upgrade
...................................................................................................................................................................................................................................
365-312-807R7.2
Issue 4, May 2007
Alcatel-Lucent - Proprietary
See notice on first page
12-7
To Next Page
Loading...
