SDBER 2-286
SDBER (Signal Degrade) 2-287
SDBER (RS) (RS Signal Degrade) 2-288
SDEG-O 2-288
SDEG-O (SUPVY Signal Degrade) 2-288
SDEGR 2-291
SDEGR (Egress Signal Degrade - ODU) 2-291
SFMISMATCH 2-292
SFMISMATCH (Software Version Mismatch) 2-292
SLTMSIG 2-293
SLTMSIG (Timing reference frequency has moved off the required accuracy
limits (not Protected or Protection not Available))
2-293
SSF 2-294
SSF (Server Signal Failure - OTU) 2-294
SSFODU 2-295
SSFODU (Server Signal Failure - ODU) 2-295
SSFODUEGR 2-297
SSFODUEGR (Egress Signal Server Failure - ODU) 2-297
SWEQPT 2-299
SWEQPT (Equipment Controller redundancy is compromised); SWEQPT
(Protection switching equipment failure)
2-299
SWEQPT (Equipment Controller redundancy is compromised) 2-300
SWEQPT (Protection Switching Equipment Failure) 2-304
SWFTDWN 2-305
SWFTDWN (Software Upgrade in Progress) 2-305
Committing the Software Upgrade 2-306
Backing out the Software Upgrade 2-307
SWMTXMOD 2-307
SWMTXMOD 2-307
SWMTXMOD (Switching Matrix Module Failure) 2-308
SWMTXMOD (Y-Cable Switchover Timer Expired) 2-310
SWUPGCOMMIT 2-310
SWUPGCOMMIT (No committed software load (Autoinstall disabled)) 2-310
Trouble-clearing procedures Overview
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-14
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
To Next Page
Loading...
