EasyManua.ls Logo

Alcatel-Lucent 5620 - Page 111

Alcatel-Lucent 5620
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 — Troubleshooting using network alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 3-69
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Name: MisconfiguredInflow
Type: communicationsAlarm (4)
Probable cause: misconfiguredInflow (809)
Severity: Major
Object Type (class):
VlanPathInstance
Domain: mpr
Implicitly cleared (self-clearing): Yes
The alarm is raised when the ports in
a service use different inflow clock
sources.
Name: MprVllDown
Type: serviceDown (88)
Probable cause: vlanPathInstanceDown
(524)
Severity: Major
Object Type (class): MprVll
Domain: mpr
Implicitly cleared (self-clearing): Yes
The alarm is raised when the
Operational State of a VLAN path
instance is Down, for example,
because of one of the following
conditions:
The radio link is down.
A cross connect is deleted.
The Operational State of one or
more ports in the cross connect
is Down.
Name: PhysicalLinkDown
Type: communicationsAlarm (4)
Probable cause: PhysicalLinkDown (846)
Severity: Major
Object Type (class): VlanPath
Domain: mpr
Implicitly cleared (self-clearing): Yes
The alarm is raised when the radio
link between two hops of a VLAN
path is down.
Name: PortsSeggregated
Type: communicationsAlarm (4)
Probable cause: portsSeggregated (522)
Severity: Major
Object Type (class):
VlanPathInstance
Domain: mpr
Implicitly cleared (self-clearing): Yes
The alarm is raised when the two
ports that are to be part of a service
cross-connect are segregated.
Name: RadioLinkDown
Type: communicationsAlarm (4)
Probable cause: radioLinkDown (523)
Severity: Major
Object Type (class): VlanPath
Domain: mpr
Implicitly cleared (self-clearing): Yes
The alarm is raised when the radio
link between two hops of a VLAN
path is down.
Name: RDI
Type: communicationsAlarm (4)
Probable cause: remoteDefectIndication
(572)
Severity: Minor
Object Type (class): IMALink
Domain: mpr
Implicitly cleared (self-clearing): Yes
The alarm is raised when a Remote
Defect Indication signal is detected
on an ASAP MDA.
Name: VlanPathInstanceDown
Type: VlanPathInstanceAlarm (61)
Probable cause: vlanPathInstanceDown
(524)
Severity: Major
Object Type (class):
VlanPathInstance
Domain: mpr
Implicitly cleared (self-clearing): Yes
The alarm is raised when the
Operational State of a VLAN path
instance is Down, for example,
because of one of the following
conditions:
The radio link is down.
A cross connect is deleted.
The Operational State of one or
more ports in the cross connect
is Down.
Alarm Attributes Additional information
(2 of 2)
Aug 2010
AAAD
8.0 R4

Table of Contents

Other manuals for Alcatel-Lucent 5620

Related product manuals