Alcatel-Lucent 5620 - Page 127

3 — Troubleshooting using network alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 3-85
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Name: InterfaceLsReqConfig
Type: configurationAlarm (11)
Probable causes:
• badVersion (35)
• areaMismatch (36)
• unknownNbmaNbr (37)
• unknownVirtualNbr (38)
• netMaskMismatch (39)
• helloIntervalMismatch (40)
• deadIntervalMismatch (41)
• optionMismatch (42)
• mtuMismatch (43)
• noError (44)
• duplicateRouterId (168)
• ifTypeMismatch (187)
• nullRouterId (188)
• ifAdminDown (834)
• ifPassive (835)
Severity: Warning
Object Type (class): Interface
Domain: ospf
Implicitly cleared (self-clearing): No
The alarm is raised when an NE
receives an lsReq packet on a
non-virtual interface from an NE
whose configuration parameters
conflict with the local NE
configuration parameters.
Name: InterfaceLsUpdateAuthFailure
Type: authenticationAlarm (14)
Probable causes:
• authTypeMismatch (45)
• authFailure (46)
Severity: Warning
Object Type (class): Interface
Domain: ospf
Implicitly cleared (self-clearing): No
The alarm is raised when an NE
receives an lsUpdate packet on a
non-virtual interface from an NE
whose authentication key or
authentication type conflicts with
the local NE authentication key or
authentication type.
Name: InterfaceLsUpdateConfig
Type: configurationAlarm (11)
Probable causes:
• badVersion (35)
• areaMismatch (36)
• unknownNbmaNbr (37)
• unknownVirtualNbr (38)
• netMaskMismatch (39)
• helloIntervalMismatch (40)
• deadIntervalMismatch (41)
• optionMismatch (42)
• mtuMismatch (43)
• noError (44)
• duplicateRouterId (168)
• ifTypeMismatch (187)
• nullRouterId (188)
• ifAdminDown (834)
• ifPassive (835)
Severity: Warning
Object Type (class): Interface
Domain: ospf
Implicitly cleared (self-clearing): No
The alarm is raised when an NE
receives an lsUpdate packet on a
non-virtual interface from an NE
whose configuration parameters
conflict with the local NE
configuration parameters.
Name: InterfaceNeighborDown
Type: NeighborDown (20)
Probable cause: NeighborDown (103)
Severity: Warning
Object Type (class): Interface
Domain: ospf
Implicitly cleared (self-clearing): Yes
The alarm is raised when an
interface neighbor is operationally
down.
Alarm Attributes Additional information
(3 of 12)
Aug 2010
AAAD
8.0 R4