Alcatel-Lucent 5620 - Page 137

3 — Troubleshooting using network alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 3-95
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Table 3-49 Domain: policy
Table 3-50 Domain: ppp
Name: NeighborLoss
Type: communicationsAlarm (4)
Probable cause: NeighborConnectionLost
(148)
Severity: Warning
Object Type (class): Interface
Domain: pim
Implicitly cleared (self-clearing): Yes
The alarm is raised when the
connection to a neighbor is lost.
Name: peerSetConfigurationIssue
Type: configurationAlarm (11)
Probable cause: mismatchPeerSets (199)
Severity: Major
Object Type (class):
VirtualAnyCastRP
Domain: pim
Implicitly cleared (self-clearing): Yes
The alarm is raised when a peer set
is misconfigured.
Name: PimDown
Type: ProtocolAlarm (1)
Probable cause: protocolDown (1)
Severity: Critical
Object Type (class): Site
Domain: pim
Implicitly cleared (self-clearing): Yes
This alarm is raised when a PIM site is
administratively up but operationally
down.The alarm clears when the site
becomes operationally up or
administratively down.
Alarm Attributes Additional information
Name: DefaultInstanceInconsistency
Type: ConfigurationAlarm (15)
Probable cause:
multipleDefaultInstancesEncountered (54)
Severity: Warning
Object Type (class): Manager
Domain: policy
Implicitly cleared (self-clearing): Yes
The alarm is raised when an
accounting policy is the default for
more then one service type or more
then one network type.
Name: TemplateInconsistency
Type: ConfigurationAlarm (15)
Probable cause: templatePolicyMismatch
(149)
Severity: Warning
Object Type (class): PolicyDefinition
Domain: policy
Implicitly cleared (self-clearing): Yes
The alarm is raised when there is a
parameter type or value mismatch
between a global policy and a local
policy.
Alarm Attributes Additional information
Name: PppLoopbackDetected
Type: configurationAlarm (11)
Probable cause: PppLoopbackDetected
(259)
Severity: Major
Object Type (class): Interface
Domain: ppp
Implicitly cleared (self-clearing): Yes
The alarm is raised when the value of
tmnxPppLocalMagicNumber is the
same as the value of
tmnxPppRemoteMagicNumber,
which indicates that the link may be
looped back.
Alarm Attributes Additional information
(2 of 2)
Aug 2010
AAAD
8.0 R4