EasyManua.ls Logo

Alcatel-Lucent 5620 - Page 158

Alcatel-Lucent 5620
306 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 — Troubleshooting using network alarms
3-116 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
Table 3-65 Domain: sitesec
Name: TodSuiteAssignmentFailure
Type: todSuiteAlarm (35)
Probable cause:
configConflictOrResourceFull (274)
Severity: Minor
Object Type (class): AccessInterface
Domain: service
Implicitly cleared (self-clearing): No
The alarm is raised when a Time of
Day suite cannot be assigned to an
aggregation scheduler, or to an L2 or
L3 access interface, because of a
configuration conflict or a lack of
resources. The alarm is not raised
against a SAP.
Name: TopologyMisconfigured
Type: configurationAlarm (11)
Probable cause: topologyMisconfigured (81)
Severity: Critical
Object Type (class): Service
Domain: service
Implicitly cleared (self-clearing): Yes
The alarm is raised when the same
service ID on two NEs is associated
with a different service type on each
NE, or when a 7250 SAS or Telco
VLAN is configured using a port that
is not in Network mode.
Name: TypeMismatch
Type: configurationAlarm (11)
Probable cause:
serviceSiteTypeMisconfigured (82)
Severity: Critical
Object Type (class): Service
Domain: service
Implicitly cleared (self-clearing): Yes
The alarm is raised when one
5620 SAM service ID is associated
with service sites that belong to
different service types.
Name: VideoInterfaceDown
Type: VideoInterfaceAlarm (72)
Probable cause: interfaceDown (32)
Severity: Critical
Object Type (class): VideoInterface
Domain: service
Implicitly cleared (self-clearing): Yes
The alarm is raised when a video
interface is operationally down. The
alarm clears when the video
interface is operationally up.
Name: VLanUplinkDown
Type: VLanUplinkAlarm (89)
Probable cause: VLanUplinkDown (852)
Severity: Major
Object Type (class): VlanUplink
Domain: service
Implicitly cleared (self-clearing): Yes
The alarm is raised when a VLAN
uplink is operationally down.
Name: VLanUplinkNotCreated
Type: VLanUplinkAlarm (89)
Probable cause: VLanUplinkNotCreated
(853)
Severity: Major
Object Type (class): Service
Domain: service
Implicitly cleared (self-clearing): Yes
The alarm is raised when an
expected VLAN uplink does not exist.
Alarm Attributes Additional information
Name:
ManagementAccessFilterMisconfigured
Type: configurationAlarm (11)
Probable cause: invalidSourcePortIdentifier
(61)
Severity: Warning
Object Type (class): MacMafEntry,
MafEntry
Domain: sitesec
Implicitly cleared (self-clearing): Yes
The alarm is raised when a MAF is
misconfigured.
Name:
ManagementAccessFilterMisconfiguredIpv6
Type: configurationAlarm (11)
Probable cause: invalidSourcePortIdentifier
(61)
Severity: Warning
Object Type (class): MafIPv6Entry
Domain: sitesec
Implicitly cleared (self-clearing): Yes
The alarm is raised when an IPv6 MAF
is misconfigured.
Alarm Attributes Additional information
(3 of 3)
Aug 2010
AAAD
8.0 R4

Table of Contents

Other manuals for Alcatel-Lucent 5620

Related product manuals