Alcatel-Lucent 5620 - Page 163

3 — Troubleshooting using network alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 3-121
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Table 3-70 Domain: subscrident
Table 3-71 Domain: svq
Table 3-72 Domain: svt
Name: SubnetMismatch
Type: configurationAlarm (11)
Probable cause: ipAddressListMismatch
(308)
Severity: Major
Object Type (class): Instance
Domain: srrp
Implicitly cleared (self-clearing): Yes
The alarm is raised when the IP
address list received from the master
does not match the local IP address
list.
Alarm Attributes Additional information
Name: backupScriptInUse
Type: configurationAlarm (11)
Probable cause: backupInUse (206)
Severity: Major
Object Type (class): Policy
Domain: subscrident
Implicitly cleared (self-clearing): Yes
The alarm is raised when the primary
subscriber identification script is
operationally down, but one of the
other scripts is operationally up.
Name: noFunctioningScript
Type: configurationAlarm (11)
Probable cause: primaryBackupDown (207)
Severity: Critical
Object Type (class): Policy
Domain: subscrident
Implicitly cleared (self-clearing): Yes
The alarm is raised when all
subscriber identification scripts are
operationally down.
Name: scriptBackupLost
Type: configurationAlarm (11)
Probable cause: backupDown (205)
Severity: Warning
Object Type (class): Policy
Domain: subscrident
Implicitly cleared (self-clearing): Yes
The alarm is raised when the primary
subscriber identification script URL is
operationally up, but a
lower-priority script or URL is
operationally down.
Alarm Attributes Additional information
Name: TodSuiteAssignmentFailure
Type: todSuiteAlarm (35)
Probable cause: assignmentFailure (242)
Severity: Minor
Object Type (class):
AggregationScheduler
Domain: svq
Implicitly cleared (self-clearing): No
The alarm is raised when an object
fails to perform the action specified
in a Time of Day suite.
Alarm Attributes Additional information
Name: FrameSizeProblem
Type: configurationAlarm (11)
Probable cause: frameSizeProblem (33)
Severity: Critical
Object Type (class): SdpBinding
Domain: svt
Implicitly cleared (self-clearing): Yes
The alarm is raised when a
provisioned MTU size value is greater
than the supported MTU size value.
(1 of 3)
Alarm Attributes Additional information
(2 of 2)
Aug 2010
AAAD
8.0 R4