Alcatel-Lucent 5620 - Page 199

4 — Troubleshooting services and connectivity
Alcatel-Lucent 5620 Service Aware Manager, Release 4-19
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Table 4-6 snmpDump options for Windows
The utility displays status messages similar to the following as it initializes:
Init Products ...
Init ProductFamilyDefs ...
Init PollingDirectiveDefs ...
Start reading from Node ...
The utility then begins to retrieve the MIB tables. As It processes a MIB table, it
lists the table name and the number of entries the table contains, as shown below:
IF-MIB.ifEntry : 21
IP-MIB.ipAddrEntry : 5
MPLS-LSR-STD-MIB.mplsInterfaceEntry : 8
MPLS-TE-STD-MIB.mplsTunnelEntry : 0
MPLS-TE-STD-MIB.mplsTunnelHopEntry : 0
MPLS-TE-STD-MIB.mplsTunnelARHopEntry : 0
MPLS-TE-STD-MIB.mplsTunnelCHopEntry : 0
Option Description
-v version The SNMP version in use on the generic NE, which can be 1, 2, or 3
Default: 2
-f file_name The output filename
Default: host-snmpDump.out in the current directory
-h host The IP address or hostname of the generic NE
Default: localhost
-c community The SNMP community
-u v3_user The SNMPv3 user name
-e snmp_engine_ID The SNMP engine ID
-ap v3_auth_protocol The SNMPv3 authorization protocol, which can be MD5 or SHA
Default: MD5
-apw v3_auth_password The SNMPv3 authorization password
-ppw v3_privacy_password The SNMPv3 privacy password
-cn v3_context_name The SNMPv3 context name
-ci v3_context_ID The SNMPv3 context ID
-p port The TCP port on the main server that snmpDump must use to reach the
generic NE
Default: 161
-t timeout A communication timeout value
-r retries The number of times to retry connecting to the generic NE
Aug 2010
AAAD
8.0 R4