5 — Troubleshooting using topology maps
Alcatel-Lucent 5620 Service Aware Manager, Release 5-3
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
Table 5-2 Map elements
Interpreting map status indicators
The maps provide the following status information for managed network elements:
• operational status of a device
• operational status of an interface
• the most severe alarm for a device or service
Table 5-3 describes the map status indicators. There are no status indicators for
unmanaged devices.
Table 5-3 Map status indicators
Element type Description
Device icon Managed devices, such as a 7750 SR
Port icon Managed access interface
Unmanaged device icon Unmanaged device, such as a PE router
Topology group icon Managed topology groups
Composite service icon Managed composite services
Service tier icon Services that make up the managed composite services
IP/MPLS cloud icon IP/MPLS network
Green lines Provisioned paths for an LSP map.
Network interface that is operationally up for all other maps.
Gray lines Actual paths for an LSP map
Red lines Network interface that is operationally down
Indicator Description
Device icon color The color of device icons and links represents the reachability of
the device.
Red indicates that the device or link is not SNMP reachable.
Yellow indicates that the device is being synchronized.
Green indicates that the device is SNMP reachable.
For a service view, red indicates that the service on the device is
down.
Topology group icon The color and icon in the upper left corner of the topology group
icon indicate the most severe alarm on any of the devices in the
group.
The color of the upper middle section of the topology group icon
indicates the aggregated SNMP connectivity status of the devices in
the topology group.
The color of the upper right corner of the topology group icon
indicates the aggregated link status of the links in the topology
group.
(1 of 2)
To Next Page
Loading...
