6 — 5620 SAM LogViewer
Alcatel-Lucent 5620 Service Aware Manager, Release 6-15
3HE 05723 TQZZA Edition 01 Troubleshooting Guide
7 If you choose the E-Mail plug-in, perform the following steps.
i Specify a regular expression as a match criterion in the Message Filter field.
ii Configure the parameters:
• To—specifies the e-mail address of the recipient
• Password—specifies an SMTP password
• Message Filter—specifies a regular expression that is used as a filter to
identify the log entries that invoke the plug-in
• Minimum E-mail Time (minutes)—specifies the minimum time between
messages that the plug-in sends, to prevent e-mail flooding
• User—specifies a user name associated with the plug-in
• Host—specifies the name of an SMTP e-mail server
• Body Prefix—specifies the text that precedes the log-entry text in an
e-mail message
• From—specifies the sender e-mail address used by the plug-in
• Subject—specifies the e-mail message subject line
8 Click on the OK button. The Local Log File form closes.
6.5 LogViewer CLI procedures
The following procedures describe how to use the LogViewer CLI application.
Procedure 6-5 To display logs using the LogViewer CLI
Perform this procedure to start the LogViewer CLI application and view one or more
logs.
1 Log in to the 5620 SAM server as an administrator.
Note — If the 5620 SAM server is installed on Solaris, you must log in as
the samadmin user.
To Next Page
Loading...
