Alcatel-Lucent 5620 - Page 226

6 — 5620 SAM LogViewer
6-18 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
File Name (full path)?
ii Enter the absolute or relative path of the log file that you want to open
and press ↵. LogViewer opens the file.
7 Enter the following at the prompt to enter display mode and view the real-time
log updates:
return ↵
LogViewer enters display mode. Log updates are displayed as they occur.
8 To add a filter that restricts the types of log entries that are displayed during the
current LogViewer session, perform the following steps.
i Press ↵ to enter command mode.
ii Enter the following at the prompt to return to the root menu:
root ↵
The following prompt is displayed:
log>
iii Enter the following at the prompt:
filter ↵
The following prompt is displayed:
log-filter>
iv Enter the following at the prompt:
add ↵
The following prompt is displayed:
Filter name:
v Enter a name for the filter and press ↵.
vi The following prompts are displayed in sequence:
Level:
Logger:
Thread:
Timestamp:
Message:
Note — You can also use commands at this menu level to list and
delete filters.
Aug 2010
AAAD
8.0 R4