Alcatel-Lucent 5620 - Page 88

3 — Troubleshooting using network alarms
3-46 Alcatel-Lucent 5620 Service Aware Manager, Release
Troubleshooting Guide 3HE 05723 TQZZA Edition 01
Table 3-15 Domain: ethernetequipment
Alarm Attributes Additional information
Name: EthernetPortConfiguredLoopback
Type: configurationAlarm (11)
Probable cause:
ethernetPortConfiguredLoopback (567)
Severity: Warning
Object Type (class):
EthernetPortSpecifics
Domain: ethernetequipment
Implicitly cleared (self-clearing): No
The alarm is raised when a timed
loopback is in effect for an Ethernet
port.
Name: EthernetPortHighBer
Type: communicationsAlarm (4)
Probable cause: HighBer (238)
Severity: Major
Object Type (class):
EthernetPortSpecifics
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports a high bit-error rate on an
Ethernet port.
Name: EthernetPortLocalFault
Type: communicationsAlarm (4)
Probable cause: LocalFault (236)
Severity: Major
Object Type (class):
EthernetPortSpecifics
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports a local fault on an Ethernet
port.
Name: EthernetPortNoFrameLock
Type: communicationsAlarm (4)
Probable cause: NoFrameLock (237)
Severity: Major
Object Type (class):
EthernetPortSpecifics
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports No Frame Lock on an
Ethernet port.
Name: EthernetPortRemoteFault
Type: communicationsAlarm (4)
Probable cause: RemoteFault (235)
Severity: Major
Object Type (class):
EthernetPortSpecifics
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports a remote fault on an
Ethernet port.
Name: EthernetPortSignalFailure
Type: communicationsAlarm (4)
Probable cause: SignalFailure (234)
Severity: Major
Object Type (class):
EthernetPortSpecifics
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports a signal failure on an
Ethernet port.
Name: OTUAlarmIndicationSignal
Type: communicationsAlarm (4)
Probable cause: AlarmIndicationSignal (531)
Severity: Major
Object Type (class): OtuInterface
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports an AIS on an OTU-enabled
interface.
Name: OTUBackwardDefectIndication
Type: communicationsAlarm (4)
Probable cause: BackwardDefectIndication
(532)
Severity: Major
Object Type (class): OtuInterface
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports a BDI on an OTU-enabled
interface.
Name:
OTUBackwardIncomingAlignmentError
Type: communicationsAlarm (4)
Probable cause:
BackwardIncomingAlignmentError (578)
Severity: Major
Object Type (class): OtuInterface
Domain: ethernetequipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a device
reports an ODU alarm indication
signal on an OTU-enabled interface.
(1 of 4)
Aug 2010
AAAD
8.0 R4