Alcatel-Lucent 7210 SAS M - Page 327

System Management
7210 SAS M, X Basic System Configuration Guide Page 327
Power supply number : 2
Configured power supply type : dc
Status : up
DC power : within range
Over temp : within range
Input power : within range
Output power : within range
===============================================================================
*A:7210-SAS-X>
alarm-contact-input
Syntax alarm-contact-input alarm-contact-input-id [detail]
Context show
Description This command displays information on the alarm contact input pin.
Output alarm-contact-input output — The following table describes alarm-contact-input output fields.
Label Description
Alarm input pin Number
Indicates the pin alarm input pin number.
Alarm input pin Descrip-
tion
Describs the alarm indicating its usage or attribute.
Alarm input pin current
state
Indicates the current state of the alarm contact input pin.
Alarm output pin used
Indicates the alarm output pin used.
Last state change time
Indicates the previous state change time.